Series JMSVT Liquid Level Switch

HOME / PRODUCTS / CLARK-RELIANCE / LIQUID LEVEL / JMSVT Liquid Level Switch

JERGUSON^® SERIES JMSVT LIQUID LEVEL SWITCH

VIBRATING TUNING FORK LIQUID LEVEL SWITCH

MODEL: JER_JMSVT_LLS

The Jerguson^® series JMSVT liquid level switch uses the principles of a tuning fork. Piezo-electric crystals force the forks to oscillate at their fundamental frequency (natural resonance). If installed as a high alarm, forks are free to oscillate in the air. As the liquid level rises and touches the forks, the fork movement dampens which signals the JMSVT to switch.

Jerguson^® series JMSVT switches can be used for “direct load” or “PNP switching”. Designed for use in non-hazardous areas.

Request a Quote

Features

STANDARD FEATURES

Heartbeat LED
Resistant to Bubbles and Vibration
Failsafe High
Hygienic Fittings
Reverse Polarity Protected
Magnetic Test Point
Small Fork for Minimal Vessel Intrusion

SPECIFICATION	DESCRIPTION
Wetside Material	316L Stainless Steel
Gasket (1″ BSPP model only)	Non-Asbestos
Body Material	304 Stainless Steel
LED Window	Flame retardant Polyamide (Pa12) 12 UL94 V2
Plug	Polyamide (+G) plug seal Nitrile butadiene rubber
Protection Rating	NEMA 4X
Operating Temperature Range	-40˚F to +302˚F CIP cleaning, 10,000 cycles for 30 minutes
Ambient Temperature Range	-40˚F to 176˚F (derated) to 122˚F at 302˚F wetside
Max Pressure	1480 PSIG
Specific Gravity Range	0.6 to 2.0 liquid viscosity range 0.2 to 10,000 cps
Liquid viscosity range	0.2 to 10,000 cps
Switching Point (Water)	1/2″ from tip (vertical)/from edge (horizontal) of fork
Hysteresis (Water)	+/- .04″ switching delay 1 second dry to wet/wet to dry

QUALITY CONTROL PRODUCTS

LCM stocks and sales only the highest quality name brand process control products. Brands like Clark-Reliance^®, Dyna-Flo, Farris™, USI, iValve and Graco. Our control products experts can help you find the right products and materials to meet your application requirements. LCM’s trained valve technitions will make sure your products are set, tested and ready for installation.

See Our Products

FARRIS AUTHORIZED SERVICE TEAM

LCM is a Farris™ Authorized Service Team “FAST” Center, manufacturer’s representative, and ASME code assembler for Farris™ pressure relief valves. LCM is also a code pressure relief valve repair facility and national board “VR” stamp holder for pressure relief valve repair. We take quality and service to another level with ongoing technical training and education.

Learn More

CUSTOM VALVE MODIFICATIONS

LCM inventories loosely assembled valves that are ready for custom modifications and testing. LCM’s new machining, assembly and testing facilities are equipped with the latest technology and equipment to customize your valves with optional materials, regulation, piping, actuation and much more. Send us your project and valve requirements and we’ll make it happen.

LCM Services